The CPAP device is a flow generator consisting of a pump that sucks the air in the room by passing it through the dust filter, and blows this sucked air at a preset pressure.The CPAP device has a delay timer/ramp system.This feature allows the patient to get used to the low pressure air while falling asleep.The device then gradually reaches the preset pressure.In addition, the GOLDSLEEP Cpap device has a PATIENT TRACKING system that monitors the patient's total sleep time of 24 hours.Thanks to the Patient Tracking system, our device decides to increase/decrease your therapy pressure in 0.1 mbar steps.
THERAPY PRESSURE
3 - 20 mbar (in 0.1 mbar increments up to 20.0 mbar)
STARTING PRESSURE(RAMP PRESSURE)
It can be adjusted between 3 mbar and 20 mbar.
RAMP TIME
OFF / 5-10-15…90 MIN
E-FLEX
OFF / 1-2-3 (It makes exhalation easier by reducing the pressure during expiration.)
PATIENT FOLLOW-UP
ON / OFF - It follows the patient for 24 hours and increases/decreases the therapy pressure up to 0.1 mbar (±2 mbar) when AHI is 3 and above.
TUBE DIAMETER
12mm/15mm/22mm
PRESSURE UNIT
(hPa/mbar/cmH2o)